Differences

This shows you the differences between two versions of the page.

--- linux:gentoo-upgrade-mbp [2015/02/01 13:30] – [Upgrade the M4 SSD firmware without DVD ROM] percy
+++ linux:gentoo-upgrade-mbp [2015/02/05 12:01] – [grub menu.lst] percy
@@ Line 38: / Line 38: @@
   -  https://bpaste.net/show/a121b5edf5d1
+===== Manual Config the network  =====
+<code Bash>
+ifconfig enp2s0f0 10.0.0.30 netmask 255.255.255.0
+route add default gw 10.0.0.1
+echo "nameserver 8.8.8.8" >>/etc/resolv.conf
+echo "nameserver 223.5.5.5" >>/etc/resolv.conf
+</code>
 ===== Fix Gentoo System =====
@@ Line 50: / Line 59: @@
 startx
 slim
-systemctrl enable/disable xdm/gdm/slim
+X
+Xorg
+Xorg -config /path/to/xorg.conf
+Xorg -configure
+aticonfig --initial
+eselect open list
+eselect open set 1
+systemctl enable/disable xdm/gdm/slim
 ls /etc/X11/
 emerge -uDN world -pv
@@ Line 62: / Line 78: @@
 jianqing ~ # cat /etc/env.d/90xsession
 XSESSION="Gnome"
+</code>
+===== Compile kernel =====
+<code BASH>
+cd /usr/src/linux
+make menuconfig
+make -j5
+make modules_install
+cp arch/x86_64/boot/bzImage /boot/kernel-3.17.7
+</code>
+===== grub menu.lst=====
+  jianqing linux # cat /boot/grub/menu.lst
+<code BASH>
+# This is a sample grub.conf for use with Genkernel, per the Gentoo handbook
+# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#doc_chap2
+# If you are not using Genkernel and you need help creating this file, you
+# should consult the handbook. Alternatively, consult the grub.conf.sample that
+# is included with the Grub documentation.
+default 0
+timeout 30
+splashimage=(hd0,3)/boot/grub/splash.xpm.gz
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.17.7-1 init=/usr/lib/systemd/systemd nomodeset
+root (hd0,3)
+kernel /boot/kernel-3.17.7-1 root=/dev/sda4 init=/usr/lib/systemd/systemd nomodeset
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.10.25 init=/usr/lib/systemd/systemd nomodeset
+root (hd0,3)
+kernel /boot/kernel-3.10.25 root=/dev/sda4 init=/usr/lib/systemd/systemd nomodeset
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.17.7 init=/usr/lib/systemd/systemd nomodeset
+root (hd0,3)
+kernel /boot/kernel-3.17.7 root=/dev/sda4 init=/usr/lib/systemd/systemd nomodeset
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.10.25 nomodeset
+root (hd0,3)
+kernel /boot/kernel-3.10.25 root=/dev/sda4 nomodeset
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.6.11
+root (hd0,3)
+kernel /boot/kernel-3.6.11 root=/dev/sda4
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.6.11-2
+root (hd0,3)
+kernel /boot/kernel-3.6.11-2 root=/dev/sda4 radeon.modeset=0
+title Gentoo Linux root (hd0,4) root=/dev/sda5 /boot/kernel-3.6.11
+root (hd0,4)
+kernel /boot/kernel-3.6.11 root=/dev/sda5
+title Gentoo Linux root (hd0,3) root=/dev/sda4 /boot/kernel-3.3.8
+root (hd0,3)
+kernel /boot/kernel-3.3.8 root=/dev/sda4
+title Gentoo Linux root (hd0,4) root=/dev/sda5 /boot/kernel-3.3.8
+root (hd0,4)
+kernel /boot/kernel-3.3.8 root=/dev/sda5
+title Gentoo Linux root (hd0,4) root=/dev/sda5 /boot/kernel_3.2.12
+root (hd0,4)
+#kernel /boot/kernel-genkernel-x86-2.6.24-gentoo-r5 root=/dev/ram0 real_root=/dev/sda3
+kernel /boot/kernel_3.2.12 root=/dev/sda5
+#initrd /boot/genkernel
+# vim:ft=conf:
+</code>
+Need set the CONFIG_B43=m not CONFIG_B43=y
+<code>
+CONFIG_B43=m
+</code>
+<code>
+systemctl enable dhcpcd
+systemctl enable NetworkManager
 </code>