User Tools

Site Tools


linux:openwrt:openwrt

This is an old revision of the document!


OpenWRT

Image download

Unzip

gzip -d openwrt-19.07.4-x86-64-combined-squashfs.img.gz

Update network config

After install the image in the VMM, need to update the network config(/etc/config/network)

  1. gateway
  2. dns

config interface 'lan'
	option type 'bridge'
	option ifname 'eth0'
	option proto 'static'
	option ipaddr '192.168.2.1'
	option netmask '255.255.255.0'
	option ip6assign '60'
	option multipath 'on'
	option gateway '192.168.1.1'
	list dns '8.8.8.8'

config interface 'wan'
        option ifname 'eth1'
	option proto 'dhcp'

Install luci

Install tools

``` opkg install curl unzip wget-ssl ipset

```

Install v2ray

Download the v2ray from

I use my VPS to download it first

wget https://ef.pjq.me/download/openwrt/v2ray-linux-64.zip
unzip v2ray-linux-64.zip -d v2ray

Install BBR

opkg install kmod-tcp-bbr
insmod kmod-tcp-bbr
lsmod|grep bbr
vim /etc/sysctl.conf

And add the following:

net.core.default_qdisc=fq_codel
net.ipv4.tcp_congestion_control=bbr

Then reload the setting

sysctl -p

lsmod|grep bbr
tcp_bbr                16384 35 

Update hosts

vim /etc/config/dhcp

Add the `list addnhosts '/etc/myhosts'`

config dnsmasq                                                                                                     ...                                                                                           
        list addnhosts '/etc/myhosts'    
Then add your hosts to /etc/myhosts

vim /etc/myhosts

Then restart the dnsmasq service

/etc/init.d/dnsmasq restart

The network eth0 doesn't work, and saw the log

device eth0 entered promiscuous mode

After google, I try to disable promiscuous mode. ifconfig eth0 -promisc

/var/www/dokuwiki/wiki/data/attic/linux/openwrt/openwrt.1651578638.txt.gz · Last modified: 2022/05/03 19:50 by jianqing